Victron Energy Phoenix Inverter 12/1200 230V Schuko – PIN121220200

Victron Energy PIN121220200

The Phoenix Inverter 12/1200 inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

Monitoring
In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven it’s reliability over many years. The Phoenix Smart Inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the loads decreases below a preset value. Once in standby the inverter will switch on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off

A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

DC connection with screw terminals

No special tools needed for installation.

Monitor, operate & control over your system

VictronConnect lets you get live status information and configure your Phoenix Inverter 12/1200  when connected to a Bluetooth Smart Dongle.

The REC040010210R is the correct controller for the Phoenix Inverter 

We are Victron Energy distributors, if you require any help or assistance, please feel free to contact us. If you cannot find the specific item you require, send us a message and we can always point you in the right direction.